|Artificial stone||> 50 years|
|GRC||> 50 years|
|Plaster||With limited contact with the gypsum precipitation and open air - up to 10 years|
|Ceramic granite||1000 years|
|Putty for exterior facades||of more than 25 years|
Artificial stone facade does not collapse under the influence of the atmospheric environment and will not change for more than 50 years.
No need for the reconstruction of the facade in the next 50 years, the lack of operating costs, saving money.
|Material||Radioactive material quality|
|Artificial stone||Radiation levels in the normal range|
|GRC||The radiation level in the normal range|
|Plaster||Radiation levels in the normal range|
|Concrete||Radiation levels in the normal range|
|Brick||Radiation levels in the normal range|
|Ceramic granite||13 to 16 mR / h radioactive|
|Marble||Up to 13 mR / h. Virtually non-radioactive as it is low in silica and related rare earth and other impurities|
|Granite||25-30 mR / h. When heated radioactive radioactivity granite increases due to the intensification of the selection of granite radon. This should be remembered for those who want a granite brick fireplaces.|
|Putty for exterior facades||Radiation levels in the normal range|
Artificial stone complies with the regulatory requirements of the quality of radiation, in contrast to the natural stone does not serve as a source of high background radiation and is safe for the health of the material.
It is safe for human health.
|Material||Environmentally friendly material (provided that the quality of production and raw materials)|
|Artificial stone||is not toxic|
|GRC||is not toxic|
|Plaster||is not toxic|
|Concrete||is not toxic|
|Brick||is not toxic|
|Ceramic granite||is not toxic|
|Marble||is not toxic|
|Granite||is not toxic|
|Putty for exterior facades||toxic|
Artificial stone is an environmentally friendly and safe material, does not contain harmful ingredients, raw materials for the production of sand, cement, water.
It is safe for human health and the environment.
Property of a material saturated with water, to withstand alternating freezing and thawing, which occurs during the penetration of water into the capillary voids of the material, its subsequent freezing, expanding ice crystals and an increase in pressure in the material. Thus frost-resistant ability of a material to resist changes in temperature.
|Artificial stone||>150 cycles|
|Ceramic granite||>150 cycles|
|Granite||300 cycles. Granite practically does not absorb moisture (water absorption coefficient - 0,05-0,17%), so the frost granite high|
|Putty for exterior facades||35-100 cycles|
Artificial stone without losing its strength and with no signs of destruction, can withstand 150 cycles of freezing and thawing. Material less susceptible temperature changes, characterized by the absence of pores and micro-cracks on its surface opposed to water penetration, and does not expand or causes destruction when frost.
No need for facade renovation, lack of operating costs, saving money.
|Material||Resistance to mold and fungus. Waterproof, w|
|Artificial stone||Resistant. W=6|
|Concrete||Can be exposed. W=4-12|
|Putty for exterior facades||Exposed to|
A material is considered waterproof if it has water resistance coefficient W = 6.
Artificial stone is water repellent, waterproof indicator has W = 6 (the ability not to pass under pressure into the structure of the water material).
This means that a column of water 6 meters high are not selling the material of artificial stone 100 mm, as the artificial stone is a fine-pored material and the temperature change in it gets considerably less moisture.
The lower the moisture in the material, the less the possibility of the formation therein of molds and fungi and its destruction.
On dry exterior walls will be no place for mold and mildew, which will create a healthy atmosphere in the room and for many years to ensure the strength of the building's facade.
The level of possible load, which must withstand the material.
|Artificial stone||200-250 kg/cm²|
|Ceramic granite||>200 kg/1cm²|
|Putty for exterior facades||at least 5 kg/1sm²|
Tiles made of artificial stone can withstand a load of 200-250 kg per 1 cm².
This means that the artificial stone is a durable material and with a load on it, such as a truck, paving slabs will not burst, do not fly (with a thickness of 40 mm).
No operating costs, saving money.
|Artificial stone||5% (low water absorption)|
Artificial stone structure of low porosity prevents capillary material impregnated with water, for example, if on the building (the walls of which are lined with artificial stone) will host a tropical downpour for an edge perimeter of the building facade will be wet and the inside perimeter of the walls themselves - dry.
Reducing the possibility of destruction of the building, reducing the need for materials for building insulation, absence of mold in the building, there is no need further to heat the building - no maintenance costs and saving money, providing a healthy atmosphere in the room.
Artificial stone is colored in the mass-resistant dyes and the color remains unchanged for at least 10 years.
No need to further paint the facade, saving money.
Artificial stone has a color gamut of more than 50 colors and enables an individual approach to customer requirements.
Individual approach in the selection of colors.
The ability to use an artificial stone for facade work and interior decoration. As well as the use in landscape design, while the design:
The facade of the building gets a unique look and blends harmoniously into the surrounding landscape. the most daring design decisions can be implemented for facade work, interior decoration and landscaping elements.
The facade of the object of artificial stone appearance will not otlichaema from the same facade of natural stone (for example, the use of travertine), at a fraction of the cost of artificial stone material.
Regular completion of the new range of textures that mimic natural stone.
This means that for the installation of artificial stone does not require any special knowledge, artificial stone is glued to the glue on the sand-cement and other substrates.
Cost savings to attract installers. Installation can be performed independently if desired .
When facing facades of artificial stone can be combined with architectural elements.
The facade of the building gets a unique look and blends harmoniously into the surrounding landscape.
This means that our own production enables the company to offer high quality customer products at the best price, with no trade margins (as opposed to commercial companies that are not manufacturers of products that implement the goods trade margins, thereby increasing the purchase price for the products).
Articles made of artificial stone are cheaper than natural stone.