"UKREPIT" putty is a specialized makeup for professional users for application to the polystyrene foam products surface in order to protect it against environmental influences, mechanical damage and to impart flexibility to the material.

Packing: bucket with handle weight of 5.10 and 20 kg.
Manufactured in accordance with TS 5772-004-26556806-2015.


  • The average value of the diameter of the putty cone face breaking is 130 mm.

    This means that the putty mixture doesn’t slide from vertical surfaces after application of a layer of 5 mm thick.

  • The density of the putty mixture is 1722 g / cm

    This means that the greater the density of the putty mixture, the stronger it rests on the material and durable construction.

  • The degree of drying putty is 12.40 hours

    This means that the conventional drying time putty layer, equals 24 hours, the degree of drying putty ECODECO mixtures saves time for installation work.

  • Adhesion to the concrete fillings at 0.6 MCA.

    This means that putty mixture is kept very firmly on the concrete basis. For departing from the base area of 10x10 cm (100 cm²) required a force of 600 kg, that is to tear putty mixture of the concrete foundation can only be the weight of the car.

  • The compressive strength of 2.7 MCA.

    This means that due to the putty mixture composition (fillers, binders, chemical additives), after drying the solution has increased strength and can withstand external loads, including on the surfaces exposed to dynamic and impact loads.

  • Putty bending strength of 0.11 MCA.

    This means that due to manufacturing techniques and putty mixture composition: fillers, binders, chemical additives, after drying the solution has increased strength and can withstand the maximum load at which the material remains intact and can restore the original geometric dimensions.

  • Water retention 99.8 g/cm³.

    This means that due to the chemical composition of the putty mixture while stirring the solution, separating the water in it is performed for 1-1.5 hours, which eliminates the possibility of continuous mixing and accelerates the process of applying the mixture to the surface.

  • Designed for professional use

    However, it is perfect for beginners in the construction, as ready-to-use and convenient to work with it.

  • Produced in accordance with TS 5772-004-26556806-2015.


  • Reduced time for installation work
  • Reduction of terms of commissioning the whole object
  • No operating costs
  • Saving money
  • Savings timing on product installation

Back to the list