Flexible acrylic tile "UKREPIT"

Flexible acrylic grout "UKREPIT" is a specialized acrylic composition for professional use for docking decorative elements surfaces, performs the function of bonding, sealing and filling joints.



Packing: bucket with handle weight of 5.10 and 20 kg.
Manufactured in accordance with TS 5772-004-26556806-2015

Advantages:

  • The average value of the diameter of the cone face breaking grouting 115 mm.

    This means that the grout does not drip /slide off the wall after it is applied with a layer thickness of 5 mm.

  • The density of the grout 1830 g / cm³

    This means that the greater the density of the grout, the stronger hold on it, and the material is durable design.

  • The degree of drying grout 9.20 hours

    This means that the conventional grouting drying time equal to 24 hours, the degree of drying of the glue "ECODECO" saves time for installation work.

  • Adhesion to concrete grouting at 0.54 MCA.

    This means grout very firmly stick to the concrete base and the separation from the base area of 10x10 cm (100 cm²) requires a force of 540kg, that is to tear the adhesive from the concrete foundation can only be made with the weight of the brown bear.

  • Grouting Compressive strength 1.6 MCA.

    This means that due to the grout composition (fillers, binders, chemical additives), after drying the solution has increased strength and can withstand external loads, including on the surfaces exposed to dynamic and impact loads.

  • Bending strength grout 0.02 MCA.

    This means that due to manufacturing technologies and grout within its composition: fillers, binders, chemical additives, after drying the solution has increased strength and can withstand the maximum load at which the material remains intact and can restore the original geometric dimensions.

  • Water retention grouting 99.9 g / cm³.

    This means that due to the chemical composition of the grout, while stirring the solution, separating the water in it is performed for 1-1.5 hours, which eliminates the possibility of continuous mixing and accelerates the process of applying the mixture to the surface.

  • Designed for professional use.

  • Braves at least 100 cycles of "freezing-thawing".

  • It gives elasticity places profiles joints.

  • It prevents the formation of cracks

  • Safe for the environment.

  • Produced in accordance with TS 5772-004-26556806-2015.



Benefits:

  • Reduced time for installation work
  • Reduction of commissioning terms of the whole object
  • No operating costs
  • Saving money
  • Saving installation time


Back to the list