Construction chemicals "UKREPIT"

UM large - reinforcing Putty (Medium)
Medium / latex-acrylic

Density, kg/m3 1,63 Consumption, kg/sq.m. or l/sq.m. 4,5 Thickness of the coating, mm 2-4 mm Capacity of industrial packaging, l. 10L (16,3kg) 20L (32,6kg) Packing: bucket More...

US - reinforcement putty (Spray)
For spraying / Latex

Density, kg/m3 1,72 Consumption, kg/sq.m. or l/sq.m. 5 Thickness of the coating, mm 2-5 mm Capacity of industrial packaging, l. 10L (17,2kg) 20L (34,4kg) Packing: bucket More...

UF - reinforcement putty (Flex)
Flexible, fine-grained / Acrylic

Density, kg/m3 1,67 Consumption, kg/sq.m. or l/sq.m. 4,5 Thickness of the coating, mm 2-4 mm Capacity of industrial packaging, l. 10L (16,7kg) 20L (33,4kg) Packing: bucket More...

UGStart - Primer for installation

Density, kg/m3 1 Consumption, kg/sq.m. or l/sq.m. two layers 1l 5 sq.m. Thickness of the coating, mm two coats Capacity of industrial packaging, l. 5L Packing: jerrycan More...

UGFin - Post assembly primer for products

Density, kg/m3 1 Consumption, kg/sq.m. or l/sq.m. two layers 1l 5 sq.m. Thickness of the coating, mm two coats Capacity of industrial packaging, l. 5L Packing: jerrycan More...

UKL - adhesive for mounting products

Density, kg/m3 1,81 Consumption, kg/sq.m. or l/sq.m. - Thickness of the coating, mm 5-10 mm Capacity of industrial packaging, l. 10L (18,1kg) Packing: bucket More...

UZ - Tile Grout: product / product, product / wall

Density, kg/m3 1,83 Consumption, kg/sq.m. or l/sq.m. - Thickness of the coating, mm 5-10 mm Capacity of industrial packaging, l. 5L (9,15kg) Packing: bucket More...

Water-repellent impregnation
Wet effect

Appearance Dull white liquid Relative viscosity - 246 when the nozzle diameter of 4 mm., s 9-12 Density, kg/l 1,03-1,05 More...

Water-repellent impregnation
Dry effect

Appearance Colorless opalescent liquid Relative viscosity - 246 when the nozzle diameter of 4 mm., s 9-12 Density, kg/l 0,99-1,01 More...

Bonding agent for paving

Appearance Elastic astringent Tensile Strength 14 kgf/cm2 Viscosity (at T=23C) 2300 mPa*s Working temperature Not less than + 5С Consumption to create protective layer at depth fillings 6-8 cm Not less than 1.0 kg/m2 Setting time (depends on humidity and temperature environment) 5 to 20 hours at 20°C More...